EZ CAM™ XR
81240, 81250, 81260, 81270, 81280, 81290, 81295

FOR TWO BOLT STRUTS
EZ Cam™ XR (Extended Range) make non-adjustable two bolt struts adjustable up to ±1.75˚ camber change for both domestic and import applications. Head markings show where the cam is for maximum change and an easy-to-manipulate toothed washer lets you set positive or negative change. Simply remove the upper OE bolt, loosen the lower bolt, install and adjust the EZ Cam™ to the desired change and then tighten everything to specification. An easy fix for camber issues and a perfect companion sale for any strut job. Save time, money and effort by making aligning two bolt struts a one man job without grinding. Keep one of each in stock, measure the OE threads, replace the OE bolt with SPC’s EZ Cams™ to make your alignment jobs fast and profitable.
Patented EZ Cam™ Provide:
- Cost effective, quick one-person camber changes without grinding
- 12.9 grade bolt for the best clamp load with the highest safety factor in the industry
- A Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
- Alignment markings on the bolt head to show you where the lobe is for easy orientation during adjustment
If video will not play, click here to view
MAKING IT EZ
Save time and keep the 81240, 81250, 81260, 81270, 81280, 81290 and 81295 in stock. Measure the OE threads, or order our EZ Sizer Magnet (p/n 20503) to quickly determine the EZ Cam™ you need, and replace the OE bolt to make the strut adjustable for life. The 81139 Magnetic Camber Gauge is a great companion tool for the EZ Cam™, attach it to the rotor and watch camber change as you roll the cam bolt.

Patented EZ Cam™ XR Part Numbers:
- 81240- Pair / 10mm bolts
- 81250 - Pair / 12mm bolts
- 81260 - Pair / 14mm bolts
- 81270 - Pair / 15mm bolts
- 81280 - Pair / 16mm bolts
- 81290 - Pair / 17mm bolts
- 81295 - Pair / 18mm bolts
AFTERMARKET STRUTS? NO PROBLEM
Got aftermarket struts with a slotted hole - we’ve got the solution. It is easy to find out if a cam kit will fit your aftermarket strut with only two measurements - A (Cam Diameter) and B (Bolt Diameter. From these two measurements, it is easy to find which of the following will fit.
- 35077 - A = 1.49” (37mm) / B = M14 x 85mm
- 82110 - A = 1.5” (38mm) / B = M16 x 80mm
- 83170 - A = 1.25” (31.75mm) / B = M14 x 80mm

CONTACT THE EXPERTS
We’re here to help when you need some advice or alignment diagnosis. If the information you need is not readily available, our experts are here for you and appreciate a good challenge.
Toll Free Tech Line - 800-525-6505
Program questions can be directed to:tech@specprod.com