Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

86470 - GM FRONT CONTROL ARMS (PR)

---------------------------------------------------------------------------

Get your GM Truck or SUV’s front caster back in spec with these fixed offset upper control arms. Whether you lift your rig 3” or lower it 1” the caster will be out of factory specifications. The OE adjusters do not provide enough change, so install SPC offset upper arms for 2° caster change and then use the OE cams to dial your alignment in and get your driveability back.

Kit includes arms for both the right and left hand side. It can be used for lifted and lowered applications, if you drop your ride height more than 1” it will start to gain caster very quickly. These arms will still work for you. Just swap these arms left to right and get -2° caster change if you need it.

These arms feature:

• Full forged construction for maximum strength.
• Booted and greasable ball joints.
• SPC’s xAxis™ technology with a twist. The xAxis sealed flex joints used in these arms provide a free pivot for droop and misalignment so that OE caster and camber adjustments will not bind the joint. These joints also have rubber isolation to retain OE levels for Noise, Vibration, and Harshness (NVH).

Front Adjustment range: Caster ±2.00° FIXED
Installation time: .6 hr/side
Required: 1 kit per axle

Click for Installation Instructions

Click for Frequently Asked Questions about this part

$747.23 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.