Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

82390 - JK CASTER/PINION CAMS-2

---------------------------------------------------------------------------

This kit allows pinion angle adjustment of ±1.5° on the front and rear of the popular Jeep JK Wrangler. Front caster can also be adjusted ±1.5°.

To elongate the OEM bolt holes, use tool # 74910 Cam Knockout Punch. Front caster will change as you adjust pinion angle. Use our offset ball joints #23510-23540 to gain additional caster and adjust camber.

Front Adjustment range:
Caster ±1.50° Pinion Angle ±1.50°
Installation time: .4 hr/axle
Required: 1 kit per axle

Recommended Tools: 64225 - Angle Gauge, 74910 - Punch

Click for Installation Instructions

$44 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.