Parts 125 JEEP CASTER/PINION ANGLE ADJUSTERS These cams replace the front axle bolt to provide caster and pinion angle (up to ±3° total change). NOTE: Our #82380 is for 1997 - 06 Wrangler TJs, 1993 - 98 Grand Cherokees and 1994 - 98 Ram Trucks with 36mm cams. To elongate OE bolt holes on the #82390 use our knock out punch - #74910. Front caster will change as you adjust pinion angle. Use our offset pin joints (#23510-23540) for additional caster adjustment and to adjust camber. Front/Rear Adjustment range: Caster ±1.50°/Pinion Angle ±1.50° Required: 1 per axle 82380 APPLICATIONS Jeep 4WD: 1997 - 06 Wrangler (TJ) Dodge 4WD: With 36mm cams 1994 - 99 1500 Ram 82390 APPLICATIONS(Front & Rear) Jeep RWD/4WD: 2007 - 18 Wrangler (JK) 82380 82390 Che ou Susp Arm pa 74910 - Punch, pg 170 eck out ur JK pension ms on age 70 Front Adjustment range: Caster ±2.00° Pinion ±2.00° Required: 1 per axle APPLICATIONS Dodge 4WD: 2000 - 09 2500 Ram 2000 - 09 3500 Ram 2006 - 08 1500 Ram Mega Cab DodgeRWD: 2000 - 09 3500 Ram with mono beam DODGE CASTER CAMS (PR) Dodge solid front axled 3/4 and 1-ton trucks equipped with non-adjustable or corroded lower control arm bolts can now replace their OE bolts (50mmcams) with the #82385 Caster Adjustment Cam Kit. These replacement cam bolts provide caster and pinion adjustment up to ±2.00°. Achieve desired alignment settings with or without suspension lift kits along with providing additional positive caster for improved tracking. 82385 Call for your nearest distributor, product info or 1-800-525-6505 www.specprod.com Technical Assistance • In the USA and Canada Front Adjustment range: Caster ±1.50° Pinion ±1.50° Required: 1 per axle APPLICATIONS Jeep: 2018 - 24 Wrangler (JL) 2020 - 24 Gladiator JEEP JL FRONT CASTER/ PINION CAMS (PR) Correct front pinion and caster issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL and will provide ±1.5° of adjustment. You will need to slot the axle brackets to get the adjustment you need, use SPC rotary file set #85130 or similar. 82375 R) 8237 85130 - Rotary File Set, pg 169 Rear Adjustment range: Pinion ±1.50° Required: 1 per axle APPLICATIONS Jeep: 2018 - 24 Wrangler (JL) JEEP JL REAR PINION CAMS (PR) Correct rear pinion angle issues on your stock or lifted Jeep with this adjustable cam kit from SPC. This kit is designed specifically for the new Jeep Wrangler JL will provide ±1.5° of adjustment. You will need to slot the holes on your axle brackets to get the adjustment you need, use SPC rotary file set #85130 or simliar. 82376 85130 - Rotary File Set, pg 173 Front Adjustment range: Caster ±2.00° Pinion ±2.00° Required: 1 per axle 82386 APPLICATIONS Ram4WD: 2010 - 13 2500; 2010 - 13 3500 RamRWD: 2010 - 13 3500 with monobeam 82387 APPLICATIONS Ram4WD: 2014 - 24 2500; 2013 - 20 3500 RamRWD: 2013 - 24 3500 with monobeam HD RAM ADJ. CAM KIT (PR) Replace frozen or worn lower c arm bolts. Designed for the rig Ram heavy duty trucks, thes strength bolts come with a corrosion resistant coating for long life. Adjust caster or pinion angle by ±2.0° to dia in your alignment settings or correct for a suspension lift control gors of e high al to t kit. 82386 82387
RkJQdWJsaXNoZXIy OTk3MQ==