Application Search

Select your vehicle to find the
alignment parts you need

Part Number Search

Know your part number? Enter the
number here for more information

23830 - DODGE OFFSET PIN JOINT (1.5°)

---------------------------------------------------------------------------

These offset ball joints replace the upper ball joint on late model Dodge Trucks. They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees. Use installation sleeve set 23780 in conjunction with ball joint press 72509 for quick removal and installation of the ball joints. They come with an installation template for accurate changes.

Note: 23800 is an OEM Replacement Ball Joint with no change in camber.

23800 Cam/Cas 0.0 degree
23810 Cam/Cas +/-.50 degree
23820 Cam/Cas +/-1.00 degree
23830 Cam/Cas +/-1.50 degree

Installation time: 1.0 hr/side
Required: 1 per wheel
Recommended Tools: 23780 - Ball joint press sleeves, 72509 - Ball joint press

Click for Installation Instructions

Click for Frequently Asked Questions about this part

$171.84 MSRP

"Buy Now" pricing is at MSRP-USA only. For better pricing, please contact us for distributors in your area or online.

Warranty

LTD LIFETIME
For more on our warranties: https://www.specprod.com/warranties

On-site Service

Please Note: While SPC does not offer direct on-site service of vehicles, our experienced techs are here to help answer any alignment questions you may have through our email form and FAQ section.