|
| |
| 75800 |
|
| DUAL ANGLE SHIM (RED) |
| |
|
A patented Full Contact Dual Angle shim consisting of only three part numbers that corrects Toe and Camber with one shim.
These two-piece shims are available individually or in MasterPaks of 25. Instruction sheets are included in each shim package. Various combinations of the shims and shim accessories are included on 88700 Dual Angle Shim Board, 88715 EZ Shim(tm) and our Passenger Car Assortment Board (88260).
CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required.
U.S Patents 5,622,378 & 4,836,597 ¥ EPO 0695255
Recommended Tools: 75915 - EZ Shim Cutter
Rear Adjustment range: Camber -1.50¡ to +1.50¡ Toe -1.50¡ to +1.50¡
Installation time: .5 hr/side
Required: 1 shim per wheel
APPLICATIONS See application charts for vehicle models and years.
Buick, Cadillac, Chevrolet, Geo, Olds, Pontiac, Toyota, VW
For complete instructions - including templates for this part:
EZ Shim Installation Instructions
________________________
Check out our installation video for this part
EZ Shim Installation Video
________________________
|
 |
| |
|
| Click for installation instructions |
|
 For
best price and service call 1-800-525-6505 for a distributor near you.
This
part should only be installed by personnel who have the necessary
skill, training and tools to do the job correctly and safely. Incorrect
installation can result in personal injury, vehicle damage and /
or loss of vehicle control.
|
|
|
|
